* Sea-Bird SBE 9 Data File:
* FileName = C:\2017_Profile_Data\EX1706\EX1706_DIVE06_20170718_ROVCTD.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 5031
* Conductivity SN = 3508
* Number of Bytes Per Scan = 41
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 18 2017 22:53:22
* NMEA Latitude = 15 41.04 N
* NMEA Longitude = 169 29.04 W
* NMEA UTC (Time) = Jul 18 2017  18:50:48
* Store Lat/Lon Data = Append to Every Scan
* System UTC = Jul 18 2017 22:53:22
# nquan = 11
# nvalues = 3                           
# units = specified
# name 0 = depSM: Depth [salt water, m]
# name 1 = sal00: Salinity, Practical [PSU]
# name 2 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = timeS: Time, Elapsed [seconds]
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 7 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]
# name 8 = prDM: Pressure, Digiquartz [db]
# name 9 = prDE: Pressure, Digiquartz [psi]
# name 10 = flag: flag
# span 0 =   1202.000,   1204.000       
# span 1 =    34.5431,    34.5452       
# span 2 =    1486.24,    1486.42       
# span 3 =     4.0533,     4.0895       
# span 4 =  14607.435,  16115.098       
# span 5 =    1.74553,    1.93433       
# span 6 =    1.22142,    1.35353       
# span 7 =     53.093,     58.835       
# span 8 =   1212.632,   1214.655       
# span 9 =   1758.773,   1761.708       
# span 10 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jul 18 2017 18:50:48 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5031</SerialNumber>
#       <CalibrationDate>06-Jun-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33224866e-003</G>
#       <H>6.37196667e-004</H>
#       <I>2.12374249e-005</I>
#       <J>1.89326805e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3508</SerialNumber>
#       <CalibrationDate>21-Oct-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80732186e+000</G>
#         <H>1.53704236e+000</H>
#         <I>-2.09167504e-003</I>
#         <J>2.50523045e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0918</SerialNumber>
#       <CalibrationDate>24-Oct-16</CalibrationDate>
#       <C1>-4.189113e+004</C1>
#       <C2>-6.953845e-001</C2>
#       <C3>1.393280e-002</C3>
#       <D1>3.580000e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.026382e+001</T1>
#       <T2>-5.419485e-004</T2>
#       <T3>4.315490e-006</T3>
#       <T4>3.205380e-009</T4>
#       <Slope>0.99996352</Slope>
#       <Offset>-3.44551</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.285300e-002</AD590M>
#       <AD590B>-9.347147e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Free -->
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1462</SerialNumber>
#       <CalibrationDate>15-Apr-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.2191e-001</Soc>
#         <offset>-0.4293</offset>
#         <A>-4.9235e-003</A>
#         <B> 2.5583e-004</B>
#         <C>-3.6645e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 4.4100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Turbidity Meter, Seapoint -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>15613</SerialNumber>
#       <CalibrationDate>2016/11/27</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>3</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>15613</SerialNumber>
#       <CalibrationDate>2016/11/27</CalibrationDate>
#       <SensorName>PMEL ORP</SensorName>
#       <A0>-500.00000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Apr 03 2020 10:11:06, 7.21g [datcnv_vars = 10]
# datcnv_in = H:\EX_Data\EX1706\CTD\ROVCTD\EX1706_DIVE06_20170718_ROVCTD.hex H:\EX_Data\EX1706\CTD\ROVCTD\EX1706_DIVE06_20170718_ROVCTD.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# binavg_date = Apr 07 2020 13:18:41, 7.21g
# binavg_in = H:\EX_Data\EX1706\CTD\ROVCTD\EX1706_DIVE06_20170718_ROVCTD_A.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   1204.000    34.5431    1486.42     4.0895  14607.435    1.74553    1.22142     53.093   1214.655   1761.708 0.0000e+00
   1203.000    34.5433    1486.38     4.0844  15081.425    1.74876    1.22368     53.191   1213.644   1760.241 0.0000e+00
   1202.000    34.5452    1486.24     4.0533  16115.098    1.93433    1.35353     58.835   1212.632   1758.773 0.0000e+00