* Sea-Bird SBE 9 Data File:
* FileName = C:\2017_Profile_Data\EX1706\EX1706_DIVE04_20170715_CPCTD.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 5018
* Conductivity SN = 3470
* Number of Bytes Per Scan = 41
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 15 2017 19:21:34
* NMEA Latitude = 16 43.69 N
* NMEA Longitude = 169 21.63 W
* NMEA UTC (Time) = Jul 15 2017  19:21:34
* Store Lat/Lon Data = Append to Every Scan
** Ship:
** Station:
** Operator:
* System UTC = Jul 15 2017 19:21:34
# nquan = 6
# nvalues = 18                          
# units = specified
# name 0 = depSM: Depth [salt water, m]
# name 1 = sal00: Salinity, Practical [PSU]
# name 2 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = timeS: Time, Elapsed [seconds]
# name 5 = flag: flag
# span 0 =    559.311,  63777.342       
# span 1 =     5.5664,  1413.7563       
# span 2 =   -9999.00,    1487.87       
# span 3 =     6.5827,     6.8001       
# span 4 =   1797.667,   8061.083       
# span 5 = 0.0000e+00, 0.0000e+00       
# interval = meters: 1                  
# start_time = Jul 15 2017 19:21:34 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5018</SerialNumber>
#       <CalibrationDate>20-Oct-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33587341e-003</G>
#       <H>6.39440465e-004</H>
#       <I>2.14353389e-005</I>
#       <J>1.79318777e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3470</SerialNumber>
#       <CalibrationDate>21-Oct-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.96443751e+000</G>
#         <H>1.56728702e+000</H>
#         <I>-2.38103978e-003</I>
#         <J>2.77623171e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0917</SerialNumber>
#       <CalibrationDate>24-Oct-16</CalibrationDate>
#       <C1>-3.974366e+004</C1>
#       <C2>-1.040090e+000</C2>
#       <C3>1.296320e-002</C3>
#       <D1>3.543500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.025924e+001</T1>
#       <T2>-6.284540e-004</T2>
#       <T3>4.221300e-006</T3>
#       <T4>3.245610e-009</T4>
#       <Slope>0.99999388</Slope>
#       <Offset>-0.00018</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281080e-002</AD590M>
#       <AD590B>-9.111236e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Free -->
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2688</SerialNumber>
#       <CalibrationDate>15-Apr-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.4590e-001</Soc>
#         <offset>-0.5136</offset>
#         <A>-5.0028e-003</A>
#         <B> 2.2843e-004</B>
#         <C>-3.5835e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.2000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Turbidity Meter, Seapoint -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>15612</SerialNumber>
#       <CalibrationDate>2016/11/27</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>3</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>15614</SerialNumber>
#       <CalibrationDate>2017/02/15</CalibrationDate>
#       <SensorName>PMEL ORP</SensorName>
#       <A0>-500.00000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jul 25 2017 13:15:31, 7.21g [datcnv_vars = 5]
# datcnv_in = H:\EX_Data\EX1706\CTD\CPCTD\EX1706_DIVE04_20170715_CPCTD.hex H:\EX_Data\EX1706\CTD\CPCTD\EX1706_DIVE04_20170715_CPCTD.XMLCON
# datcnv_skipover = 0
# binavg_date = Aug 07 2017 13:18:27, 7.21g
# binavg_in = H:\EX_Data\EX1706\CTD\CPCTD\EX1706_DIVE04_20170715_CPCTD_B.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    559.311    34.3595    1485.78     6.6550   1797.667 0.0000e+00
    560.009    34.3476    1485.74     6.6457   1798.854 0.0000e+00
    561.029    34.3458    1485.75     6.6453   1799.729 0.0000e+00
    561.940    34.3512    1485.79     6.6499   1802.479 0.0000e+00
    562.984    34.3463    1485.77     6.6423   1805.313 0.0000e+00
    564.116    34.3492    1485.79     6.6414   1806.417 0.0000e+00
    564.889    34.3508    1485.81     6.6426   1820.940 0.0000e+00
    565.839    34.3502    1485.82     6.6415   1833.140 0.0000e+00
    566.764    34.3469    1485.80     6.6327   1992.451 0.0000e+00
    567.904    34.3481    1485.78     6.6239   2118.128 0.0000e+00
    568.787    34.3486    1485.81     6.6272   2141.583 0.0000e+00
    569.966    34.3571    1485.79     6.6142   2144.895 0.0000e+00
    570.797    34.3575    1485.72     6.5921   2179.549 0.0000e+00
    571.549    34.3534    1485.69     6.5827   2222.229 0.0000e+00
    572.637    34.4538    1485.90     6.6009   2308.292 0.0000e+00
    700.794    34.2723    1487.87     6.6153   2543.958 0.0000e+00
  15075.377  1413.7563   -9999.00     6.6867   5933.417 0.0000e+00
  63777.342     5.5664    1065.50     6.8001   8061.083 0.0000e+00