* Sea-Bird SBE 9 Data File:
* FileName = C:\2016_Profile_Data\EX1608\EX1608_DIVE01_20161203_CPCTD_B.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 5018
* Conductivity SN = 3470
* Number of Bytes Per Scan = 30
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Dec 03 2016 18:55:07
** Ship:
** Station:
** Operator:
* System UTC = Dec 03 2016 18:55:07
# nquan = 7
# nvalues = 17                          
# units = specified
# name 0 = depSM: Depth [salt water, m], lat = 0.00
# name 1 = sal00: Salinity, Practical [PSU]
# name 2 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = timeS: Time, Elapsed [seconds]
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = flag: flag
# span 0 =    484.158,    497.618       
# span 1 =    34.1577,    34.2041       
# span 2 =    1484.92,    1485.56       
# span 3 =     6.8070,     6.9189       
# span 4 =      0.375,  11813.139       
# span 5 =    1.93890,    3.34520       
# span 6 = 0.0000e+00, 0.0000e+00       
# interval = meters: 1                  
# start_time = Dec 03 2016 18:55:07 [System UTC, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5018</SerialNumber>
#       <CalibrationDate>20-Oct-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33587341e-003</G>
#       <H>6.39440465e-004</H>
#       <I>2.14353389e-005</I>
#       <J>1.79318777e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3470</SerialNumber>
#       <CalibrationDate>21-Oct-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.96443751e+000</G>
#         <H>1.56728702e+000</H>
#         <I>-2.38103978e-003</I>
#         <J>2.77623171e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0917</SerialNumber>
#       <CalibrationDate>24-Oct-16</CalibrationDate>
#       <C1>-3.974366e+004</C1>
#       <C2>-1.040090e+000</C2>
#       <C3>1.296320e-002</C3>
#       <D1>3.543500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.025924e+001</T1>
#       <T2>-6.284540e-004</T2>
#       <T3>4.221300e-006</T3>
#       <T4>3.245610e-009</T4>
#       <Slope>0.99999388</Slope>
#       <Offset>-0.00018</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281080e-002</AD590M>
#       <AD590B>-9.111236e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Free -->
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2688</SerialNumber>
#       <CalibrationDate>22-Oct-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.3982e-001</Soc>
#         <offset>-0.5222</offset>
#         <A>-5.5137e-003</A>
#         <B> 2.3749e-004</B>
#         <C>-3.1277e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.2300</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Turbidity Meter, Seapoint -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>15612</SerialNumber>
#       <CalibrationDate>2016/11/27</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>3</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Dec 13 2016 10:40:59, 7.21g [datcnv_vars = 6]
# datcnv_in = H:\EX_Data\EX1608\CTD\CPCTD\EX1608_DIVE01_20161203_CPCTD_B.hex H:\EX_Data\EX1608\CTD\CPCTD\EX1608_DIVE01_20161203_CPCTD_A.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# binavg_date = Dec 14 2016 14:13:27, 7.21g
# binavg_in = H:\EX_Data\EX1608\CTD\CPCTD\EX1608_DIVE01_20161203_CPCTD_B.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    496.295    34.2041    1485.56     6.9189      0.375    3.34520 0.0000e+00
    496.779    34.1735    1485.36     6.8769    178.010    2.93264 0.0000e+00
    497.618    34.1600    1485.14     6.8210   1789.968    2.45319 0.0000e+00
    496.989    34.1580    1485.10     6.8122   2622.500    2.46694 0.0000e+00
    496.128    34.1577    1485.08     6.8123   2632.621    2.31612 0.0000e+00
    495.327    34.1596    1485.10     6.8201   3231.861    2.29165 0.0000e+00
    493.956    34.1606    1485.09     6.8218   3596.688    2.17501 0.0000e+00
    493.263    34.1609    1485.08     6.8214   3599.850    2.26569 0.0000e+00
    492.069    34.1608    1485.05     6.8211   3604.938    2.34936 0.0000e+00
    491.233    34.1610    1485.01     6.8129   8272.469    2.22928 0.0000e+00
    490.290    34.1607    1484.97     6.8070  11759.133    2.07369 0.0000e+00
    489.244    34.1597    1484.97     6.8113  11768.379    2.07477 0.0000e+00
    487.953    34.1596    1484.95     6.8135  11780.187    2.03788 0.0000e+00
    486.890    34.1586    1484.95     6.8169  11791.083    2.06310 0.0000e+00
    485.996    34.1612    1484.92     6.8135  11799.125    1.93890 0.0000e+00
    485.329    34.1615    1484.92     6.8148  11806.900    1.94257 0.0000e+00
    484.158    34.1605    1484.92     6.8198  11813.139    2.02024 0.0000e+00