* Sea-Bird SBE 9 Data File:
* FileName = D:\2012_Profile_Data\EX1205L1\CTD\EX1205L1_DeckTest_120720.hex
* Software Version Seasave V 7.21f
* Temperature SN = 5023
* Conductivity SN = 43455
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 20 2012 20:29:53
* NMEA Latitude = 32 29.36 N
* NMEA Longitude = 076 12.24 W
* NMEA UTC (Time) = Jul 20 2012 20:29:52
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 9600
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Decktest training
* System UTC = Jul 20 2012 20:29:53
# nquan = 15
# nvalues = 0                           
# units = specified
# name 0 = timeJ: Julian Days
# name 1 = depSM: Depth [salt water, m]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = t190C: Temperature, 2 [ITS-90, deg C]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = sal11: Salinity, Practical, 2 [PSU]
# name 6 = c0S/m: Conductivity [S/m]
# name 7 = c1S/m: Conductivity, 2 [S/m]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = svCM1: Sound Velocity, 2 [Chen-Millero, m/s]
# name 10 = seaTurbMtr: OBS, Seapoint Turbidity [FTU]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = upoly0: Upoly 0, Oxidation Redution Potential
# name 13 = altM: Altimeter [m]
# name 14 = flag: flag
# span 0 = 0.0000e+00, 0.0000e+00       
# span 1 =      0.000,      0.000       
# span 2 =     0.0000,     0.0000       
# span 3 =     0.0000,     0.0000       
# span 4 =     0.0000,     0.0000       
# span 5 =     0.0000,     0.0000       
# span 6 =   0.000000,   0.000000       
# span 7 =   0.000000,   0.000000       
# span 8 =       0.00,       0.00       
# span 9 =       0.00,       0.00       
# span 10 =      0.000,      0.000      
# span 11 =    0.00000,    0.00000      
# span 12 =  0.0000000,  0.0000000      
# span 13 =       0.00,       0.00      
# span 14 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jul 20 2012 20:29:52
# bad_flag = -9.990e-29
# <?xml version="1.0" encoding="UTF-8"?>
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5023</SerialNumber>
#       <CalibrationDate>07-Oct-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39256402e-003</G>
#       <H>6.38948462e-004</H>
#       <I>2.20884900e-005</I>
#       <J>2.01978171e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>43455</SerialNumber>
#       <CalibrationDate>21-Oct-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00890875e+001</G>
#         <H>1.56057637e+000</H>
#         <I>-2.07284857e-003</I>
#         <J>2.45573797e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0906</SerialNumber>
#       <CalibrationDate>08-Oct-10</CalibrationDate>
#       <C1>-4.580614e+004</C1>
#       <C2>-3.898443e-001</C2>
#       <C3>1.330500e-002</C3>
#       <D1>3.298900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.025149e+001</T1>
#       <T2>-4.453190e-004</T2>
#       <T3>3.330120e-006</T3>
#       <T4>6.106350e-009</T4>
#       <Slope>0.99996000</Slope>
#       <Offset>-1.80440</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.262150e-002</AD590M>
#       <AD590B>-8.822080e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5026</SerialNumber>
#       <CalibrationDate>07-Oct-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33089545e-003</G>
#       <H>6.33783306e-004</H>
#       <I>2.09813150e-005</I>
#       <J>1.86226659e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3456</SerialNumber>
#       <CalibrationDate>21-Oc-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.94593539e+000</G>
#         <H>1.51466957e+000</H>
#         <I>-1.93533528e-003</I>
#         <J>2.33088179e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1</SerialNumber>
#       <CalibrationDate>2011</CalibrationDate>
#       <ScaleFactor>7.500</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, OBS, Seapoint Turbidity -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>12790</SerialNumber>
#       <CalibrationDate>May 2011</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>1</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2100</SerialNumber>
#       <CalibrationDate>31-Mar-11</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc> 0.3576</Soc>
#         <offset>-0.6765</offset>
#         <A>-2.1884e-003</A>
#         <B> 7.4275e-005</B>
#         <C>-1.6507e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.9263e-004</D1>
#         <D2>-4.6481e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>07</SerialNumber>
#       <CalibrationDate>May 2011</CalibrationDate>
#       <SensorName>Oxidation Redution Potential</SensorName>
#       <A0>-500.00000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 21 2012 20:28:50, 7.20c
# datcnv_in = D:\2012_Profile_Data\EX1205L1\CTD\EX1205L1_DeckTest_120720.hex D:\2012_Profile_Data\EX1205L1\CTD\EX1205L1.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 21 2012 20:32:59, 7.20c
# binavg_in = D:\2012_Profile_Data\EX1205L1\CTD\EX1205L1_DeckTest_120720.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*