2018/09/18 02:24:31 - currents1665 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 2018/09/18 02:24:31 - /dev/ttyUSB4 2018/09/18 02:24:31 - In CruiseSetup.init 2018/09/18 02:24:31 - Resuming Cruise 2018/09/18 02:24:33 - Entering buildLoggers 2018/09/18 02:24:33 - >>>> C_ss enabled <<<<< 2018/09/18 02:24:33 - Leaving buildLoggers 2018/09/18 02:24:33 - About to run mainloop 2018/09/18 02:24:36 - enter StartLogging, resume = 2018/09/18 02:24:36 - 0 2018/09/18 02:24:39 - TS? 2018/09/18 02:24:39 - TS18/09/18, 02:24:39 2018/09/18 02:24:39 - CR1 2018/09/18 02:24:39 - CL0 2018/09/18 02:24:40 - WD 111 000 000 2018/09/18 02:24:40 - TE00:00:00.00 2018/09/18 02:24:40 - CF11110 2018/09/18 02:24:40 - EX00000 2018/09/18 02:24:40 - EZ1011101 2018/09/18 02:24:40 - CL0 2018/09/18 02:24:40 - WP1 2018/09/18 02:24:40 - WN70 2018/09/18 02:24:40 - WS200 2018/09/18 02:24:40 - WF1000 2018/09/18 02:24:40 - BP1 2018/09/18 02:24:40 - BX2000 2018/09/18 02:24:40 - WB0 2018/09/18 02:24:40 - WV550 2018/09/18 02:24:40 - TP00:00.80 2018/09/18 02:24:40 - B? 2018/09/18 02:24:40 - W? 2018/09/18 02:24:42 - E? 2018/09/18 02:24:42 - C? 2018/09/18 02:24:43 - T? 2018/09/18 02:24:45 - PS0 2018/09/18 02:24:46 - In whbb_check_D_params 2018/09/18 02:24:46 - CF11110 2018/09/18 02:24:47 - Entering Loggers.start_logging 2018/09/18 02:24:47 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1899_wh300_transit/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1537237487 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/09/18 02:24:47 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1899_wh300_transit/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1537237487 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/09/18 02:24:48 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1899_wh300_transit/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1537237487 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/09/18 02:24:48 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1899_wh300_transit/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1537237487 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/09/18 02:24:48 - Leaving Loggers.start_logging 2018/09/18 02:24:48 - Updated SVs_present from SVs and wrote cmds 2018/09/18 02:24:48 - 0 2018/09/18 02:24:48 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/09/18 02:24:48 - Exiting StartLogging 2018/09/19 14:37:10 - Entering StopLogging 2018/09/19 14:37:13 - Loggers.check_stop_logging: all log processes ended 2018/09/19 14:37:17 - TS? 2018/09/19 14:37:17 - Removed /home/adcp/flags/DAS.logging 2018/09/19 14:37:17 - Exiting StopLogging 2018/09/19 14:37:21 - Ready to destroy_loggers. 2018/09/19 14:37:21 - After destroy_loggers. 2018/09/19 14:37:21 - cp -au /home/adcp/log/* /home/data/EX1899_wh300_transit/raw/log/ 2018/09/19 14:37:21 - End Cruise 2018/10/02 13:51:49 - adcptree.py /home/data/EX1810/proc/wh300 -d uhdas --configpath /home/data/EX1810/raw/config --cruisename EX1810 2018/10/02 13:51:49 - found adcp templates at /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template ** data type is uhdas making directory /home/data/EX1810/proc/wh300/adcpdb making directory /home/data/EX1810/proc/wh300/cal making directory /home/data/EX1810/proc/wh300/cal/watertrk making directory /home/data/EX1810/proc/wh300/cal/botmtrk making directory /home/data/EX1810/proc/wh300/cal/heading making directory /home/data/EX1810/proc/wh300/cal/rotate making directory /home/data/EX1810/proc/wh300/contour making directory /home/data/EX1810/proc/wh300/edit making directory /home/data/EX1810/proc/wh300/grid making directory /home/data/EX1810/proc/wh300/load making directory /home/data/EX1810/proc/wh300/nav making directory /home/data/EX1810/proc/wh300/quality making directory /home/data/EX1810/proc/wh300/ping making directory /home/data/EX1810/proc/wh300/scan making directory /home/data/EX1810/proc/wh300/stick making directory /home/data/EX1810/proc/wh300/vector - copying additional files for data type uhdas - config files for raw processing are in /home/data/EX1810/proc/wh300/config copying config files using this wildcard expansion: /home/data/EX1810/raw/config/EX1810* 2018/10/02 13:51:50 - Entering buildLoggers 2018/10/02 13:51:50 - Created output directory with mode 775 2018/10/02 13:51:50 - Created output directory with mode 775 2018/10/02 13:51:50 - Created output directory with mode 775 2018/10/02 13:51:50 - Created output directory with mode 775 2018/10/02 13:51:50 - >>>> C_ss enabled <<<<< 2018/10/02 13:51:50 - Leaving buildLoggers 2018/10/02 13:51:50 - Start Cruise 2018/10/02 16:51:46 - enter StartLogging, resume = 2018/10/02 16:51:46 - 0 2018/10/02 16:51:49 - TS? 2018/10/02 16:51:49 - TS18/10/02, 16:51:49 2018/10/02 16:51:49 - CR1 2018/10/02 16:51:49 - CL0 2018/10/02 16:51:49 - WD 111 000 000 2018/10/02 16:51:49 - TE00:00:00.00 2018/10/02 16:51:49 - CF11110 2018/10/02 16:51:49 - EX00000 2018/10/02 16:51:49 - EZ1011101 2018/10/02 16:51:49 - CL0 2018/10/02 16:51:49 - WP1 2018/10/02 16:51:49 - WN70 2018/10/02 16:51:49 - WS200 2018/10/02 16:51:49 - WF1000 2018/10/02 16:51:50 - BP1 2018/10/02 16:51:50 - BX2000 2018/10/02 16:51:50 - WB0 2018/10/02 16:51:50 - WV550 2018/10/02 16:51:50 - TP00:00.80 2018/10/02 16:51:50 - B? 2018/10/02 16:51:50 - W? 2018/10/02 16:51:51 - E? 2018/10/02 16:51:52 - C? 2018/10/02 16:51:53 - T? 2018/10/02 16:51:54 - PS0 2018/10/02 16:51:56 - In whbb_check_D_params 2018/10/02 16:51:56 - CF11110 2018/10/02 16:51:57 - Entering Loggers.start_logging 2018/10/02 16:51:57 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1810/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1538499117 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/02 16:51:57 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1810/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1538499117 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/02 16:51:57 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1810/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1538499117 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/02 16:51:58 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1810/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1538499117 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/02 16:51:58 - Leaving Loggers.start_logging 2018/10/02 16:51:58 - Updated SVs_present from SVs and wrote cmds 2018/10/02 16:51:58 - 0 2018/10/02 16:51:58 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/02 16:51:58 - Exiting StartLogging 2018/10/03 14:26:51 - Entering StopLogging 2018/10/03 14:26:53 - Loggers.check_stop_logging: all log processes ended 2018/10/03 14:26:57 - TS? 2018/10/03 14:26:57 - Removed /home/adcp/flags/DAS.logging 2018/10/03 14:26:57 - Exiting StopLogging 2018/10/04 09:26:10 - enter StartLogging, resume = 2018/10/04 09:26:10 - 0 2018/10/04 09:26:13 - TS? 2018/10/04 09:26:14 - TS18/10/04, 09:26:14 2018/10/04 09:26:14 - CR1 2018/10/04 09:26:14 - CL0 2018/10/04 09:26:14 - WD 111 000 000 2018/10/04 09:26:14 - TE00:00:00.00 2018/10/04 09:26:14 - CF11110 2018/10/04 09:26:14 - EX00000 2018/10/04 09:26:14 - EZ1011101 2018/10/04 09:26:14 - CL0 2018/10/04 09:26:14 - WP1 2018/10/04 09:26:14 - WN70 2018/10/04 09:26:14 - WS200 2018/10/04 09:26:14 - WF1000 2018/10/04 09:26:14 - BP0 2018/10/04 09:26:14 - BX2000 2018/10/04 09:26:15 - WB0 2018/10/04 09:26:15 - WV550 2018/10/04 09:26:15 - TP00:00.80 2018/10/04 09:26:15 - B? 2018/10/04 09:26:15 - W? 2018/10/04 09:26:16 - E? 2018/10/04 09:26:17 - C? 2018/10/04 09:26:18 - T? 2018/10/04 09:26:19 - PS0 2018/10/04 09:26:21 - In whbb_check_D_params 2018/10/04 09:26:21 - CF11110 2018/10/04 09:26:22 - Entering Loggers.start_logging 2018/10/04 09:26:22 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1810/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1538645182 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/04 09:26:22 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1810/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1538645182 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/04 09:26:22 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1810/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1538645182 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/04 09:26:22 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1810/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1538645182 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/04 09:26:23 - Leaving Loggers.start_logging 2018/10/04 09:26:23 - Updated SVs_present from SVs and wrote cmds 2018/10/04 09:26:23 - 0 2018/10/04 09:26:23 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/04 09:26:23 - Exiting StartLogging 2018/10/04 11:33:33 - Entering StopLogging 2018/10/04 11:33:36 - Loggers.check_stop_logging: all log processes ended 2018/10/04 11:33:39 - TS? 2018/10/04 11:33:39 - Removed /home/adcp/flags/DAS.logging 2018/10/04 11:33:39 - Exiting StopLogging 2018/10/06 13:09:26 - enter StartLogging, resume = 2018/10/06 13:09:26 - 0 2018/10/06 13:09:26 - Entering Loggers.start_logging 2018/10/06 13:09:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1810/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1538831366 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/06 13:09:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1810/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1538831366 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/06 13:09:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1810/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1538831366 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/06 13:09:27 - Leaving Loggers.start_logging 2018/10/06 13:09:27 - Updated SVs_present from SVs and wrote cmds 2018/10/06 13:09:27 - 0 2018/10/06 13:09:27 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/06 13:09:27 - Exiting StartLogging 2018/10/06 13:10:45 - Entering StopLogging 2018/10/06 13:10:49 - Loggers.check_stop_logging: all log processes ended 2018/10/06 13:10:49 - Removed /home/adcp/flags/DAS.logging 2018/10/06 13:10:49 - Exiting StopLogging 2018/10/06 14:25:26 - enter StartLogging, resume = 2018/10/06 14:25:26 - 0 2018/10/06 14:25:26 - Entering Loggers.start_logging 2018/10/06 14:25:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1810/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1538835926 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/06 14:25:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1810/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1538835926 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/06 14:25:27 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1810/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1538835926 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/06 14:25:27 - Leaving Loggers.start_logging 2018/10/06 14:25:27 - Updated SVs_present from SVs and wrote cmds 2018/10/06 14:25:27 - 0 2018/10/06 14:25:27 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/06 14:25:27 - Exiting StartLogging 2018/10/06 14:26:06 - Entering StopLogging 2018/10/06 14:26:08 - Loggers.check_stop_logging: all log processes ended 2018/10/06 14:26:08 - Removed /home/adcp/flags/DAS.logging 2018/10/06 14:26:08 - Exiting StopLogging 2018/10/06 14:36:29 - enter StartLogging, resume = 2018/10/06 14:36:29 - 0 2018/10/06 14:36:29 - Entering Loggers.start_logging 2018/10/06 14:36:29 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1810/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1538836589 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/06 14:36:30 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1810/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1538836589 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/06 14:36:30 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1810/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1538836589 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/06 14:36:30 - Leaving Loggers.start_logging 2018/10/06 14:36:30 - Updated SVs_present from SVs and wrote cmds 2018/10/06 14:36:30 - 0 2018/10/06 14:36:30 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/06 14:36:30 - Exiting StartLogging 2018/10/26 14:56:33 - Entering StopLogging 2018/10/26 14:56:35 - Loggers.check_stop_logging: all log processes ended 2018/10/26 14:56:35 - Removed /home/adcp/flags/DAS.logging 2018/10/26 14:56:35 - Exiting StopLogging 2018/10/26 14:56:37 - Ready to destroy_loggers. 2018/10/26 14:56:37 - After destroy_loggers. 2018/10/26 14:56:37 - cp -au /home/adcp/log/* /home/data/EX1810/raw/log/ 2018/10/26 14:56:37 - End Cruise 2018/10/26 14:56:58 - adcptree.py /home/data/EX1811/proc/wh300 -d uhdas --configpath /home/data/EX1811/raw/config --cruisename EX1811 2018/10/26 14:56:58 - found adcp templates at /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template ** data type is uhdas making directory /home/data/EX1811/proc/wh300/adcpdb making directory /home/data/EX1811/proc/wh300/cal making directory /home/data/EX1811/proc/wh300/cal/watertrk making directory /home/data/EX1811/proc/wh300/cal/botmtrk making directory /home/data/EX1811/proc/wh300/cal/heading making directory /home/data/EX1811/proc/wh300/cal/rotate making directory /home/data/EX1811/proc/wh300/contour making directory /home/data/EX1811/proc/wh300/edit making directory /home/data/EX1811/proc/wh300/grid making directory /home/data/EX1811/proc/wh300/load making directory /home/data/EX1811/proc/wh300/nav making directory /home/data/EX1811/proc/wh300/quality making directory /home/data/EX1811/proc/wh300/ping making directory /home/data/EX1811/proc/wh300/scan making directory /home/data/EX1811/proc/wh300/stick making directory /home/data/EX1811/proc/wh300/vector - copying additional files for data type uhdas - config files for raw processing are in /home/data/EX1811/proc/wh300/config copying config files using this wildcard expansion: /home/data/EX1811/raw/config/EX1811* 2018/10/26 14:56:59 - Entering buildLoggers 2018/10/26 14:56:59 - Created output directory with mode 775 2018/10/26 14:56:59 - Created output directory with mode 775 2018/10/26 14:56:59 - Created output directory with mode 775 2018/10/26 14:56:59 - Created output directory with mode 775 2018/10/26 14:56:59 - >>>> C_ss enabled <<<<< 2018/10/26 14:56:59 - Leaving buildLoggers 2018/10/26 14:56:59 - Start Cruise 2018/10/30 14:13:54 - enter StartLogging, resume = 2018/10/30 14:13:54 - 0 2018/10/30 14:13:57 - TS? 2018/10/30 14:13:57 - TS18/10/30, 14:13:57 2018/10/30 14:13:57 - CR1 2018/10/30 14:13:57 - CL0 2018/10/30 14:13:58 - WD 111 000 000 2018/10/30 14:13:58 - TE00:00:00.00 2018/10/30 14:13:58 - CF11110 2018/10/30 14:13:58 - EX00000 2018/10/30 14:13:58 - EZ1011101 2018/10/30 14:13:58 - CL0 2018/10/30 14:13:58 - WP1 2018/10/30 14:13:58 - WN70 2018/10/30 14:13:58 - WS200 2018/10/30 14:13:58 - WF1000 2018/10/30 14:13:58 - BP1 2018/10/30 14:13:58 - BX2000 2018/10/30 14:13:58 - WB0 2018/10/30 14:13:58 - WV550 2018/10/30 14:13:58 - TP00:00.80 2018/10/30 14:13:58 - B? 2018/10/30 14:13:59 - W? 2018/10/30 14:14:00 - E? 2018/10/30 14:14:00 - C? 2018/10/30 14:14:01 - T? 2018/10/30 14:14:03 - PS0 2018/10/30 14:14:04 - In whbb_check_D_params 2018/10/30 14:14:04 - CF11110 2018/10/30 14:14:05 - Entering Loggers.start_logging 2018/10/30 14:14:05 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1811/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1540908845 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/30 14:14:06 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1811/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1540908845 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/30 14:14:06 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1811/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1540908845 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/30 14:14:06 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1811/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1540908845 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/30 14:14:06 - Leaving Loggers.start_logging 2018/10/30 14:14:06 - Updated SVs_present from SVs and wrote cmds 2018/10/30 14:14:06 - 0 2018/10/30 14:14:06 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/30 14:14:06 - Exiting StartLogging 2018/10/30 14:24:46 - Entering StopLogging 2018/10/30 14:24:51 - Loggers.check_stop_logging: all log processes ended 2018/10/30 14:24:54 - TS? 2018/10/30 14:24:54 - Removed /home/adcp/flags/DAS.logging 2018/10/30 14:24:54 - Exiting StopLogging 2018/10/30 14:52:25 - enter StartLogging, resume = 2018/10/30 14:52:25 - 0 2018/10/30 14:52:28 - TS? 2018/10/30 14:52:28 - TS18/10/30, 14:52:28 2018/10/30 14:52:28 - CR1 2018/10/30 14:52:29 - CL0 2018/10/30 14:52:29 - WD 111 000 000 2018/10/30 14:52:29 - TE00:00:00.00 2018/10/30 14:52:29 - CF11110 2018/10/30 14:52:29 - EX00000 2018/10/30 14:52:29 - EZ1011101 2018/10/30 14:52:29 - CL0 2018/10/30 14:52:29 - WP1 2018/10/30 14:52:29 - WN70 2018/10/30 14:52:29 - WS200 2018/10/30 14:52:29 - WF1000 2018/10/30 14:52:29 - BP1 2018/10/30 14:52:29 - BX2000 2018/10/30 14:52:29 - WB0 2018/10/30 14:52:29 - WV550 2018/10/30 14:52:29 - TP00:00.80 2018/10/30 14:52:29 - B? 2018/10/30 14:52:30 - W? 2018/10/30 14:52:31 - E? 2018/10/30 14:52:31 - C? 2018/10/30 14:52:33 - T? 2018/10/30 14:52:34 - PS0 2018/10/30 14:52:35 - In whbb_check_D_params 2018/10/30 14:52:35 - CF11110 2018/10/30 14:52:37 - Entering Loggers.start_logging 2018/10/30 14:52:37 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1811/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1540911157 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/30 14:52:37 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1811/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1540911157 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/30 14:52:37 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1811/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1540911157 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/30 14:52:37 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1811/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1540911157 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/30 14:52:37 - Leaving Loggers.start_logging 2018/10/30 14:52:37 - Updated SVs_present from SVs and wrote cmds 2018/10/30 14:52:37 - 0 2018/10/30 14:52:37 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/30 14:52:37 - Exiting StartLogging 2018/10/30 15:51:29 - Entering StopLogging 2018/10/30 15:51:32 - Loggers.check_stop_logging: all log processes ended 2018/10/30 15:51:36 - TS? 2018/10/30 15:51:36 - Removed /home/adcp/flags/DAS.logging 2018/10/30 15:51:36 - Exiting StopLogging 2018/10/30 20:02:42 - enter StartLogging, resume = 2018/10/30 20:02:42 - 0 2018/10/30 20:02:45 - TS? 2018/10/30 20:02:46 - TS18/10/30, 20:02:46 2018/10/30 20:02:46 - CR1 2018/10/30 20:02:46 - CL0 2018/10/30 20:02:46 - WD 111 000 000 2018/10/30 20:02:46 - TE00:00:00.00 2018/10/30 20:02:46 - CF11110 2018/10/30 20:02:46 - EX00000 2018/10/30 20:02:46 - EZ1011101 2018/10/30 20:02:46 - CL0 2018/10/30 20:02:46 - WP1 2018/10/30 20:02:46 - WN70 2018/10/30 20:02:46 - WS200 2018/10/30 20:02:46 - WF1000 2018/10/30 20:02:46 - BP1 2018/10/30 20:02:46 - BX2000 2018/10/30 20:02:46 - WB0 2018/10/30 20:02:47 - WV550 2018/10/30 20:02:47 - TP00:00.80 2018/10/30 20:02:47 - B? 2018/10/30 20:02:47 - W? 2018/10/30 20:02:48 - E? 2018/10/30 20:02:49 - C? 2018/10/30 20:02:50 - T? 2018/10/30 20:02:51 - PS0 2018/10/30 20:02:53 - In whbb_check_D_params 2018/10/30 20:02:53 - CF11110 2018/10/30 20:02:54 - Entering Loggers.start_logging 2018/10/30 20:02:54 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1811/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1540929774 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/30 20:02:54 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1811/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1540929774 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/30 20:02:54 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1811/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1540929774 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/30 20:02:54 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1811/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1540929774 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/30 20:02:55 - Leaving Loggers.start_logging 2018/10/30 20:02:55 - Updated SVs_present from SVs and wrote cmds 2018/10/30 20:02:55 - 0 2018/10/30 20:02:55 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/30 20:02:55 - Exiting StartLogging 2018/10/30 22:50:29 - Entering StopLogging 2018/10/30 22:50:32 - Loggers.check_stop_logging: all log processes ended 2018/10/30 22:50:44 - Wakeup of wh300 timed out. 2018/10/30 22:50:44 - Removed /home/adcp/flags/DAS.logging 2018/10/30 22:50:44 - Exiting StopLogging 2018/10/31 10:12:45 - enter StartLogging, resume = 2018/10/31 10:12:45 - 0 2018/10/31 10:12:48 - TS? 2018/10/31 10:12:48 - TS18/10/31, 10:12:48 2018/10/31 10:12:49 - CR1 2018/10/31 10:12:49 - CL0 2018/10/31 10:12:49 - WD 111 000 000 2018/10/31 10:12:49 - TE00:00:00.00 2018/10/31 10:12:49 - CF11110 2018/10/31 10:12:49 - EX00000 2018/10/31 10:12:49 - EZ1011101 2018/10/31 10:12:49 - CL0 2018/10/31 10:12:49 - WP1 2018/10/31 10:12:49 - WN70 2018/10/31 10:12:49 - WS200 2018/10/31 10:12:49 - WF1000 2018/10/31 10:12:49 - BP1 2018/10/31 10:12:49 - BX2000 2018/10/31 10:12:49 - WB0 2018/10/31 10:12:49 - WV550 2018/10/31 10:12:50 - TP00:00.80 2018/10/31 10:12:50 - B? 2018/10/31 10:12:50 - W? 2018/10/31 10:12:51 - E? 2018/10/31 10:12:52 - C? 2018/10/31 10:12:53 - T? 2018/10/31 10:12:54 - PS0 2018/10/31 10:12:55 - In whbb_check_D_params 2018/10/31 10:12:55 - CF11110 2018/10/31 10:12:57 - Entering Loggers.start_logging 2018/10/31 10:12:57 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1811/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1540980777 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB4 & 2018/10/31 10:12:57 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1811/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1540980777 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/10/31 10:12:57 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB6 -b 9600 -d /home/data/EX1811/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB6 -o /tmp/SerialLogger/outpipe.ttyUSB6 -T 1540980777 -f ex -F -m 1 -H 2 -e pmv -tc '$GPGGA' '$PASHR' 2> /tmp/stderr.ttyUSB6 & 2018/10/31 10:12:57 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1811/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1540980777 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/10/31 10:12:58 - Leaving Loggers.start_logging 2018/10/31 10:12:58 - Updated SVs_present from SVs and wrote cmds 2018/10/31 10:12:58 - 0 2018/10/31 10:12:58 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/10/31 10:12:58 - Exiting StartLogging 2018/10/31 10:45:29 - Entering StopLogging 2018/10/31 10:45:35 - Loggers.check_stop_logging: all log processes ended 2018/10/31 10:45:47 - Wakeup of wh300 timed out. 2018/10/31 10:45:47 - Removed /home/adcp/flags/DAS.logging 2018/10/31 10:45:47 - Exiting StopLogging 2018/10/31 10:46:00 - enter StartLogging, resume = 2018/10/31 10:46:00 - 0 2018/10/31 10:46:11 - term 0 ADCP wh300 startup failure 2018/10/31 10:46:11 - Traceback (most recent call last): 2018/10/31 10:46:11 - File "/usr/local/lib/python2.7/dist-packages/uhdas/uhdas/DAS.py", line 356, in StartLogging 2018/10/31 10:46:11 - term.start_binary(cmdlist) 2018/10/31 10:46:11 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 234, in start_binary 2018/10/31 10:46:11 - self.wakeup() 2018/10/31 10:46:11 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 155, in wakeup 2018/10/31 10:46:11 - self.slow_wakeup() 2018/10/31 10:46:11 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 126, in slow_wakeup 2018/10/31 10:46:11 - self.waitfor(b'>', timeout=3, quiet=0.5) 2018/10/31 10:46:11 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/tk_terminal.py", line 286, in waitfor 2018/10/31 10:46:11 - raise Timeout 2018/10/31 10:46:11 - Timeout 2018/10/31 12:47:32 - enter StartLogging, resume = 2018/10/31 12:47:32 - 0 2018/10/31 12:47:43 - term 0 ADCP wh300 startup failure 2018/10/31 12:47:43 - Traceback (most recent call last): 2018/10/31 12:47:43 - File "/usr/local/lib/python2.7/dist-packages/uhdas/uhdas/DAS.py", line 356, in StartLogging 2018/10/31 12:47:43 - term.start_binary(cmdlist) 2018/10/31 12:47:43 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 234, in start_binary 2018/10/31 12:47:43 - self.wakeup() 2018/10/31 12:47:43 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 155, in wakeup 2018/10/31 12:47:43 - self.slow_wakeup() 2018/10/31 12:47:43 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 126, in slow_wakeup 2018/10/31 12:47:43 - self.waitfor(b'>', timeout=3, quiet=0.5) 2018/10/31 12:47:43 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/tk_terminal.py", line 286, in waitfor 2018/10/31 12:47:43 - raise Timeout 2018/10/31 12:47:43 - Timeout 2018/10/31 12:48:17 - Ready to destroy_loggers. 2018/10/31 12:48:17 - After destroy_loggers. 2018/10/31 12:48:17 - cp -au /home/adcp/log/* /home/data/EX1811/raw/log/ 2018/10/31 12:48:17 - End Cruise 2018/10/31 12:48:23 - mainloop ended