2018/04/11 21:23:19 - currents1665 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 2018/04/11 21:23:19 - /dev/ttyUSB4 2018/04/11 21:23:19 - /dev/ttyUSB5 2018/04/11 21:23:19 - In CruiseSetup.init 2018/04/11 21:23:19 - About to run mainloop 2018/04/11 21:23:54 - Entering buildLoggers 2018/04/11 21:23:54 - >>>> C_ss enabled <<<<< 2018/04/11 21:23:54 - Leaving buildLoggers 2018/04/11 21:23:54 - Start Cruise 2018/04/11 21:23:57 - enter StartLogging, resume = 2018/04/11 21:23:57 - 0 2018/04/11 21:24:08 - term 0 ADCP wh300 startup failure 2018/04/11 21:24:08 - Traceback (most recent call last): 2018/04/11 21:24:08 - File "/usr/local/lib/python2.7/dist-packages/uhdas/uhdas/DAS.py", line 356, in StartLogging 2018/04/11 21:24:08 - term.start_binary(cmdlist) 2018/04/11 21:24:08 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 234, in start_binary 2018/04/11 21:24:08 - self.wakeup() 2018/04/11 21:24:08 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 155, in wakeup 2018/04/11 21:24:08 - self.slow_wakeup() 2018/04/11 21:24:08 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/oswh_term.py", line 126, in slow_wakeup 2018/04/11 21:24:08 - self.waitfor(b'>', timeout=3, quiet=0.5) 2018/04/11 21:24:08 - File "/usr/local/lib/python2.7/dist-packages/uhdas/serial/tk_terminal.py", line 286, in waitfor 2018/04/11 21:24:08 - raise Timeout 2018/04/11 21:24:08 - Timeout 2018/04/11 21:24:16 - TS? 2018/04/11 21:24:16 - TS180411212416 2018/04/11 21:24:16 - CR1 2018/04/11 21:24:17 - WD 111 00 0000 2018/04/11 21:24:17 - ND 111 00 0000 2018/04/11 21:24:17 - EA04500 2018/04/11 21:24:17 - EC1500 2018/04/11 21:24:17 - EZ0011101 2018/04/11 21:24:17 - NP1 2018/04/11 21:24:17 - NN60 2018/04/11 21:24:17 - NS2400 2018/04/11 21:24:17 - NF1600 2018/04/11 21:24:17 - WP1 2018/04/11 21:24:17 - WN80 2018/04/11 21:24:17 - WS1200 2018/04/11 21:24:17 - WF1600 2018/04/11 21:24:17 - BP1 2018/04/11 21:24:17 - BX10000 2018/04/11 21:24:17 - TP00:03.00 2018/04/11 21:24:17 - CX0,0 2018/04/11 21:24:17 - B? 2018/04/11 21:24:18 - N? 2018/04/11 21:24:19 - W? 2018/04/11 21:24:21 - E? 2018/04/11 21:24:23 - C? 2018/04/11 21:24:25 - T? 2018/04/11 21:24:25 - PS0 2018/04/11 21:24:26 - In os_check_D_params 2018/04/11 21:24:26 - in os_check_D_params: 111000000 2018/04/11 21:24:26 - in os_check_D_params: 111000000 2018/04/11 21:24:26 - CF11110 2018/04/11 21:24:27 - Entering Loggers.start_logging 2018/04/11 21:24:27 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB4 -b 38400 -d /home/data/EX1803_OS38_Trial/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB4 -o /tmp/SerialLogger/outpipe.ttyUSB4 -T 1523481867 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I 2> /tmp/stderr.ttyUSB4 & 2018/04/11 21:24:27 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB5 -b 38400 -d /home/data/EX1803_OS38_Trial/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5 -T 1523481867 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB5 & 2018/04/11 21:24:28 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1803_OS38_Trial/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1523481867 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/04/11 21:24:28 - /usr/local/bin/zmq_asc -y 2018 -Z tcp://127.0.0.1:38000 -d /home/data/EX1803_OS38_Trial/raw/posmv -i /tmp/SerialLogger/inpipe.tcp:--127.0.0.1:38000 -o /tmp/SerialLogger/outpipe.tcp:--127.0.0.1:38000 -T 1523481867 -f ex -F -m 1 -H 2 -e pmv '$GPGGA' '$PASHR' 2> /tmp/stderr.tcp:--127.0.0.1:38000 & 2018/04/11 21:24:28 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1803_OS38_Trial/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1523481867 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/04/11 21:24:28 - Leaving Loggers.start_logging 2018/04/11 21:24:28 - Updated SVs_present from SVs and wrote cmds 2018/04/11 21:24:28 - 0 2018/04/11 21:24:28 - Updated SVs_present from SVs and wrote cmds 2018/04/11 21:24:28 - 1 2018/04/11 21:24:28 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/04/11 21:24:28 - Exiting StartLogging 2018/04/11 21:38:33 - Entering StopLogging 2018/04/11 21:38:34 - Loggers.check_stop_logging: all log processes ended 2018/04/11 21:38:46 - Wakeup of wh300 timed out. 2018/04/11 21:38:49 - TS? 2018/04/11 21:38:49 - Removed /home/adcp/flags/DAS.logging 2018/04/11 21:38:49 - Exiting StopLogging 2018/04/11 21:39:39 - Error: unrecognized_command NP0 in file /home/adcp/config/cmdfiles/os38_surface_operations.cmd 2018/04/11 21:44:11 - enter StartLogging, resume = 2018/04/11 21:44:11 - 0 2018/04/11 21:44:14 - TS? 2018/04/11 21:44:14 - TS180411214414 2018/04/11 21:44:14 - CR1 2018/04/11 21:44:14 - WD 111 00 0000 2018/04/11 21:44:14 - ND 111 00 0000 2018/04/11 21:44:14 - EA04500 2018/04/11 21:44:15 - EC1500 2018/04/11 21:44:15 - EZ0011101 2018/04/11 21:44:15 - NP0 2018/04/11 21:44:15 - NN60 2018/04/11 21:44:15 - NS2400 2018/04/11 21:44:15 - NF1600 2018/04/11 21:44:15 - WP1 2018/04/11 21:44:15 - WN50 2018/04/11 21:44:15 - WS800 2018/04/11 21:44:15 - WF800 2018/04/11 21:44:15 - BP0 2018/04/11 21:44:15 - BX10000 2018/04/11 21:44:15 - TP00:03.00 2018/04/11 21:44:15 - CX0,0 2018/04/11 21:44:15 - B? 2018/04/11 21:44:16 - N? 2018/04/11 21:44:17 - W? 2018/04/11 21:44:19 - E? 2018/04/11 21:44:21 - C? 2018/04/11 21:44:23 - T? 2018/04/11 21:44:23 - PS0 2018/04/11 21:44:24 - In os_check_D_params 2018/04/11 21:44:24 - in os_check_D_params: 111000000 2018/04/11 21:44:24 - in os_check_D_params: 111000000 2018/04/11 21:44:24 - CF11110 2018/04/11 21:44:25 - Entering Loggers.start_logging 2018/04/11 21:44:25 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB5 -b 38400 -d /home/data/EX1803_OS38_Trial/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5 -T 1523483065 -f ex -F -m 1 -H 2 -e raw -rlE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB5 & 2018/04/11 21:44:25 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB3 -b 9600 -d /home/data/EX1803_OS38_Trial/raw/cnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3 -T 1523483065 -f ex -F -m 1 -H 2 -e gps -tc '' 2> /tmp/stderr.ttyUSB3 & 2018/04/11 21:44:26 - /usr/local/bin/zmq_asc -y 2018 -Z tcp://127.0.0.1:38000 -d /home/data/EX1803_OS38_Trial/raw/posmv -i /tmp/SerialLogger/inpipe.tcp:--127.0.0.1:38000 -o /tmp/SerialLogger/outpipe.tcp:--127.0.0.1:38000 -T 1523483065 -f ex -F -m 1 -H 2 -e pmv '$GPGGA' '$PASHR' 2> /tmp/stderr.tcp:--127.0.0.1:38000 & 2018/04/11 21:44:26 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 4800 -d /home/data/EX1803_OS38_Trial/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0 -T 1523483065 -f ex -F -m 1 -H 2 -e hdg -tc -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB0 & 2018/04/11 21:44:26 - Leaving Loggers.start_logging 2018/04/11 21:44:26 - Updated SVs_present from SVs and wrote cmds 2018/04/11 21:44:26 - 0 2018/04/11 21:44:26 - Updated SVs_present from SVs and wrote cmds 2018/04/11 21:44:26 - 1 2018/04/11 21:44:26 - Running /usr/local/currents/bin/DAS_while_logging.py 2018/04/11 21:44:26 - Exiting StartLogging 2018/04/11 23:02:08 - Entering StopLogging 2018/04/11 23:02:10 - Loggers.check_stop_logging: all log processes ended 2018/04/11 23:02:14 - TS? 2018/04/11 23:02:14 - Removed /home/adcp/flags/DAS.logging 2018/04/11 23:02:14 - Exiting StopLogging 2018/04/12 01:04:51 - Ready to destroy_loggers. 2018/04/12 01:04:51 - After destroy_loggers. 2018/04/12 01:04:51 - cp -au /home/adcp/log/* /home/data/EX1803_OS38_Trial/raw/log/ 2018/04/12 01:04:51 - End Cruise 2018/04/12 01:05:09 - adcptree.py /home/data/EX1803_Restricted/proc/wh300 -d uhdas --configpath /home/data/EX1803_Restricted/raw/config --cruisename EX1803_Restricted 2018/04/12 01:05:09 - found adcp templates at /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template ** data type is uhdas making directory /home/data/EX1803_Restricted/proc/wh300/adcpdb making directory /home/data/EX1803_Restricted/proc/wh300/cal making directory /home/data/EX1803_Restricted/proc/wh300/cal/watertrk making directory /home/data/EX1803_Restricted/proc/wh300/cal/botmtrk making directory /home/data/EX1803_Restricted/proc/wh300/cal/heading making directory /home/data/EX1803_Restricted/proc/wh300/cal/rotate making directory /home/data/EX1803_Restricted/proc/wh300/contour making directory /home/data/EX1803_Restricted/proc/wh300/edit making directory /home/data/EX1803_Restricted/proc/wh300/grid making directory /home/data/EX1803_Restricted/proc/wh300/load making directory /home/data/EX1803_Restricted/proc/wh300/nav making directory /home/data/EX1803_Restricted/proc/wh300/quality making directory /home/data/EX1803_Restricted/proc/wh300/ping making directory /home/data/EX1803_Restricted/proc/wh300/scan making directory /home/data/EX1803_Restricted/proc/wh300/stick making directory /home/data/EX1803_Restricted/proc/wh300/vector - copying additional files for data type uhdas - config files for raw processing are in /home/data/EX1803_Restricted/proc/wh300/config copying config files using this wildcard expansion: /home/data/EX1803_Restricted/raw/config/EX1803_Restricted* 2018/04/12 01:05:09 - adcptree.py /home/data/EX1803_Restricted/proc/os38bb -d uhdas --configpath /home/data/EX1803_Restricted/raw/config --cruisename EX1803_Restricted 2018/04/12 01:05:09 - found adcp templates at /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template ** data type is uhdas making directory /home/data/EX1803_Restricted/proc/os38bb/adcpdb making directory /home/data/EX1803_Restricted/proc/os38bb/cal making directory /home/data/EX1803_Restricted/proc/os38bb/cal/watertrk making directory /home/data/EX1803_Restricted/proc/os38bb/cal/botmtrk making directory /home/data/EX1803_Restricted/proc/os38bb/cal/heading making directory /home/data/EX1803_Restricted/proc/os38bb/cal/rotate making directory /home/data/EX1803_Restricted/proc/os38bb/contour making directory /home/data/EX1803_Restricted/proc/os38bb/edit making directory /home/data/EX1803_Restricted/proc/os38bb/grid making directory /home/data/EX1803_Restricted/proc/os38bb/load making directory /home/data/EX1803_Restricted/proc/os38bb/nav making directory /home/data/EX1803_Restricted/proc/os38bb/quality making directory /home/data/EX1803_Restricted/proc/os38bb/ping making directory /home/data/EX1803_Restricted/proc/os38bb/scan making directory /home/data/EX1803_Restricted/proc/os38bb/stick making directory /home/data/EX1803_Restricted/proc/os38bb/vector - copying additional files for data type uhdas - config files for raw processing are in /home/data/EX1803_Restricted/proc/os38bb/config copying config files using this wildcard expansion: /home/data/EX1803_Restricted/raw/config/EX1803_Restricted* 2018/04/12 01:05:09 - adcptree.py /home/data/EX1803_Restricted/proc/os38nb -d uhdas --configpath /home/data/EX1803_Restricted/raw/config --cruisename EX1803_Restricted 2018/04/12 01:05:09 - found adcp templates at /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template ** data type is uhdas making directory /home/data/EX1803_Restricted/proc/os38nb/adcpdb making directory /home/data/EX1803_Restricted/proc/os38nb/cal making directory /home/data/EX1803_Restricted/proc/os38nb/cal/watertrk making directory /home/data/EX1803_Restricted/proc/os38nb/cal/botmtrk making directory /home/data/EX1803_Restricted/proc/os38nb/cal/heading making directory /home/data/EX1803_Restricted/proc/os38nb/cal/rotate making directory /home/data/EX1803_Restricted/proc/os38nb/contour making directory /home/data/EX1803_Restricted/proc/os38nb/edit making directory /home/data/EX1803_Restricted/proc/os38nb/grid making directory /home/data/EX1803_Restricted/proc/os38nb/load making directory /home/data/EX1803_Restricted/proc/os38nb/nav making directory /home/data/EX1803_Restricted/proc/os38nb/quality making directory /home/data/EX1803_Restricted/proc/os38nb/ping making directory /home/data/EX1803_Restricted/proc/os38nb/scan making directory /home/data/EX1803_Restricted/proc/os38nb/stick making directory /home/data/EX1803_Restricted/proc/os38nb/vector - copying additional files for data type uhdas - config files for raw processing are in /home/data/EX1803_Restricted/proc/os38nb/config copying config files using this wildcard expansion: /home/data/EX1803_Restricted/raw/config/EX1803_Restricted* 2018/04/12 01:05:10 - Entering buildLoggers 2018/04/12 01:05:10 - Created output directory with mode 775 2018/04/12 01:05:10 - Created output directory with mode 775 2018/04/12 01:05:10 - Created output directory with mode 775 2018/04/12 01:05:10 - Created output directory with mode 775 2018/04/12 01:05:10 - Created output directory with mode 775 2018/04/12 01:05:10 - >>>> C_ss enabled <<<<< 2018/04/12 01:05:10 - Leaving buildLoggers 2018/04/12 01:05:10 - Start Cruise 2018/04/12 02:27:56 - Ready to destroy_loggers. 2018/04/12 02:27:56 - After destroy_loggers. 2018/04/12 02:27:56 - cp -au /home/adcp/log/* /home/data/EX1803_Restricted/raw/log/ 2018/04/12 02:27:56 - End Cruise 2018/04/12 02:28:10 - mainloop ended